Designed for ventilation of dead-end coal and ore mine workings, including mine workings with gas and dust hazard

VMEVV FAN


VMEVV FAN APPLICATION
Two-stage counter-rotating axial local ventilation fans VMEVV-7, VMEVV-8, VMEVV-12, VMEVV-14 with explosion-proof removable motor correspond to the requiremens of TU3146-014-72370116-2011.
Designed for ventilation of dead-end coal and ore mine workings, including mine workings with gas and dust hazard, at air density up to 1,3 kg/m3, temperature from 253К to 308К, dust content up to 50 mg/m3 and relative humidity up to 95% (at a temperature of 298К).

Explosion-proof electric motors
First stage impeller
housing
Second stage impeller
Fan skids for ground mounting
Outlet nozzle
Protection bar on the fan inlet

VMEVV fan design

The fan consists of a stage impeller, housing with integrated knife edges, skids, integrated removable motor with a special terminal box supplied with the motor, nozzle, enclosing structure, manifold, and noise mufflers.

The electric motors are installed in the boring housing and secured by six radial edges and four tie rods.


Impellers, each with 10 and 8 leaf blades welded to the wheel rim, are mounted on the motor shaft with feather key and end washer.


The fan is connected to the pipe column by means of a nozzle on which the rubberized pipes are secured with a clamp.


The fan housing is equipped with arrows indicating the direction of air flow and the direction of the wheel rotation.


The current from the mains is brought by cable type KOGESH through the terminal boxes.


For ease of transportation and installation, the fan is mounted on skids and equipped with brackets on the housing to hang it from the mine roof.

TECHNICAL SPECIFICATIONS
VME VV-7-2×37VME VV-7-2×45VME VV-7-2×55VME VV-8-2×90VME VV-12-2×75VME VV-12-2×160VME VV-14-2×90VME VV-14-2×160
Nominal impeller diameter, MM700700700800120012001400140
Nominal feed, m³/s791113,52034 2336
Nominal total pressure, Pa60006400600080004900500060006400
Maximum total efficiency factor0,840,840,850,850,840,850,840,84
Electric drive power, kW37х245х255х290х275х2160х290х2160х2
Rotation speed, min-130003000300030001500150015001500
Length, mm20102010201022002700270032003200
Width, mm93093093011001500150018001800
height, mm12001200120014001650170018001850
Fan unit weight, kg, not exceeding14501500157018002800350035004000
Feeding within the working area (min, max)...

AERODYNAMIC CHARACTERISTICS
      WE'LL MANUFACTURE A PRODUCT WITH CHARACTERISTICS YOU NEED
      Each product we manufacture at AO AMZ VENTPROM is adapted to customer needs and operating characteristics
       

      OTHER PRODUCTS