Designed to ventilate horizontal and inclined dead-end mine workings and vertical shafts with a diameter of up to 6 m, as well as mines with gas and dust hazard, tunnels, and galleries
Axial adjustable two-stage fans VME2-10А with electric drive are designed to ventilate horizontal and inclined dead-end mine workings and vertical shafts with a diameter of up to 6 m, as well as mines with gas and dust hazard, tunnels, and galleries.
The fans can operate in suction and discharge modes and have a modular design based on high-pressure aerodynamic schemes with meridional flow acceleration.
Fans can be equipped with a monitoring and diagnostic system with the possibility of outputting information to the dispatcher's AWS.
The fan is designed to operate with ducts with a diameter of 1000-1200 mm.
Skids
Inlet manifold
Guide vane
Working wheel
Impeller 2
Output straightener
Explosion-proof motor
Antistall device
Straightener
TECHNICAL SPECIFICATIONS
characteristic;value
Nominal impeller diameter, mm;1000
Nominal feed, m3/s;16
Nominal total pressure, Pa;6200
Maximum total efficiency factor;0,85
Electric drive power, kW;160
Voltage, V;380/660, 660/1140
Rotation speed, min-1;1500
Length, mm, not exceeding;2560
Width, mm, not exceeding;1550
Height, mm, not exceeding;1540
Fan unit weight, kg, not exceeding;2450
Feeding within the working area (min, max);...
Pressure within the working area (min, max);...
AERODYNAMIC CHARACTERISTICS
WE'LL MANUFACTURE A PRODUCT WITH CHARACTERISTICS YOU NEED
Each product we manufacture at AO AMZ VENTPROM is adapted to customer needs and operating characteristics